24-Key RF LED controller

Part No.:KRA24RGB

24-Key RF LED controller is used for controlling a variety of lamp whose source of light is LED.

24-Key RF LED controller

24-Key RF LED controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; At the same time, it has many advantages such as convenient connection ,simplicity to use and others. According to the actual need of customers, it can carry out jumpy changing, gradual changing and other effects of change. Total 24 modes for your choice.

Technical parameters

Working temperature: -20-60℃ 

Voltage:    DC12V、24V

Mode:     20 modes

Output:         3 circuit

Dimension:     L102.5ΧW65ΧH25 mm

Net weight:         160g 

Max.load current: 4A each loop

Output Power:     5V<60W,12V<144W,24V<216W


Controller dimension:

Remote controller dimension:

Wiring diagram:

Instructions for use:

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can’t occur between connecting wire before you turn on the power;

2.Standard color changes as follows:

Brightness +( 16 in all )                

Brightness-( 16 in all )                



Static red                

Static green                

Static blue                

Static white                

Static orange                

Static pea green                

Static dark blue                

7 color jumpy change                

Static dark yellow                

Static cyan                

Static brown                

All fade out & fade in                

Static yellow                

Static light blue                

Static pink                

7 color fade change                

Static straw yellow                

Static sky blue                

Static purple                

3 base color jumpy                


  • When switching to dynamic modes the button of “Brightness +”/ “Brightness -” means the speed of light change is up/ down, there are 100 step in all.

  • The FADE and SMOOTH all have two modes, which are “3 base colors jumpy/7 colors jumpy” and “3 base colors fade/7 colors fade”, you can press one more time to change it.

  • when press FADE and SMOOTH, the “FLASH” and “STROBE” key are invalid.

  • When in the static modes, press the “FLASH” /“STROBE” key, the mode will change to be “ the single color Stroboflash/ Gradual changing”.

44-Key RF LED controller



44-Key IR LED controller