8-Key RF LED controller

8-Key RF LED controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; At the same time, it has many advantages such as convenient connection ,simplicity to use and others. According to the actual need of customers, it can carry out jumpy changing, gradual changing and other effects of change. Total 24 modes for your choice.

Technical parameters

Working temperature： -20-60℃ 

Voltage：    DC12V、24V

Mode：     14 modes

Output：         3 circuit

Dimension：     L121ΧW53ΧH25 mm

Net weight：         255g 

Max.load current： 4A each loop

Output Power：     12V<144W，24V<288W

Instructions for use:

1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2.Adopt film button and RF for controlling,there are 8 buttons in all, the funtion of each key as follows:

(1): you could turn on/off controller at any time;

(2): Play/pause button,it is convenient for you to see the static effection of led;

(3)S+: The step of the speed change add 1 by each pressing;

(4)-: The step of the speed change subtract 1 by each pressing;

(5)B+: A brightness control button,the step of the brightness add 1 by each pressing;

(6)B-: The step of the brightness subtract 1 by each pressing;

(7)M+: The NO. of patterns add 1 by each pressing;(refer to the following form)

(8)M-: The NO. of patterns subtract 1 by each pressing;

3. Standard changes funtion as the following form: